Here is the final details of the Antec Six Hundred case customized by Mnpctech for the 2010 PAX East Event. The exterior finish is a custom mix of Silver Metallic and Gloss Black PPG automotive paint. View all of the early progress photos, HERE

Custom made 120mm Turbine Cooling Fan by Mnpctech, HERE

The 360 (2x 120mm) Turbine style front intake was made from 3/4″ thick aluminum. The design was inspired by the “Nautilus” Overkill 120mm fan grill.

Each of the 120mm Turbine Fans is 2000 rpm, 79.4 cfm @ 30 dBA.

The vented side panel was cnc milled from 3/16″ thick billet aluminum. “Antec – Believe it” logo is engraved in the surface.

Mnpctech takes laborious steps to carefully dismantle the chassis, clean and prep and then start a long time consuming process of sanding prep, applying 3 full coats of paint, more multiple grit sanding between each paint coat, followed by 4 separate clear coats. This is followed by ample proper dry times and then the finishing touches of buffing with heavy cut compound followed by a final buff with swirl remover.

The Antec 600′s smoked acrylic moon-roof was replaced by this vented billet panel.

The honeycomb grill was also custom painted. A remote 3-speed switch is mounted in the rear of the chassis that lets you balance the 200mm fan’s performance. You can also switch off the Blue LEDs.

120mm Turbine fan’s chrome plated prop-spinners.